'
1
Forums Albums Skins 1
Search Register Logon


You are logged in as a guest. Logon or register an account to access more features.
OTHER FORUMS:    Barrel Horses  -   Trucks   -   Cutting  -   Reining  -   Roping 
'
Jerking & bucking problems

Jump to page : 1
Now viewing page 1 [25 messages per page]
Last activity 2019-11-15 9:50 AM
7 replies, 4001 views

View previous thread :: View next thread
   General Discussion -> Trailer Talk  Click to return to Barrel Talk
Refresh
Message format
 
Segundo74
Reg. Oct 2019
Posted 2019-10-28 10:24 AM (#172802)
Subject: Jerking & bucking problems


New User


Posts: 3

We have an 2002 V8 8.1 3500 Chevrolet and an '01 Elite 3horse with LQ fully self contained.. Problem started on trip before last.. We have a jerking going up hill and worst getting to a stop. It is a jerking bucking type motion.. The plugs, wiring and new brakes on truck also installed a new Base Air Flow unit & filter. The truck transmission shifts very good with or without trailer. New brakes on trailer. The trailer is where it has always been and when parked on level spot it is level with truck. We have checked with others on how the coupler is on theirs and ours it the same.
We are at out wits end on this problem. I know gooseneck trailers have some jerk to them on bumps and such but this is a pretty good bucking and jerking when pulling up hill or coming to stop other wise it seems to be normal
Any suggestions is appreciated and Thank You
share Top of the page Bottom of the page
DLR
Reg. Jul 2004
Posted 2019-10-30 3:38 AM (#172806 - in reply to #172802)
Subject: RE: Jerking & bucking problems


Veteran


Posts: 168
1002525
Location: Minnesota
I have pulled goosenecks thousands of miles and currently own  three - none jerk and never have.

The only thing in your post that changed are "new brakes on trailer".  That is where I would start.  Find a good trailer shop and have them pull the wheels. 
share Top of the page Bottom of the page
Segundo74
Reg. Oct 2019
Posted 2019-11-01 5:31 PM (#172813 - in reply to #172806)
Subject: RE: Jerking & bucking problems


New User


Posts: 3

Thank You for your reply to my question.
We put new brakes on trailer, Bearings were packed of course. What would be the cause to pull the wheels? The trailer/truck just started doing this. After changing the fuel filter on the truck my husband unhooked the brakes completely and took the truck and trailer for a run up the hwy and it still did it. We've had the trailer for 11 yrs and it has pulled fine with the same truck, until now when going up a hill it bucks and jerks When coming to a stop it does it even worse.. We are at our wits end on this problem.
share Top of the page Bottom of the page
PaulChristenson
Reg. Jan 2007
Posted 2019-11-02 3:02 AM (#172814 - in reply to #172802)
Subject: RE: Jerking & bucking problems


Expert


Posts: 3853
200010005001001001002525
Location: Vermont
I would look closely at your GN pin box in your bed...to determine if there is new movement possible
share Top of the page Bottom of the page
Segundo74
Reg. Oct 2019
Posted 2019-11-02 8:48 PM (#172815 - in reply to #172814)
Subject: RE: Jerking & bucking problems


New User


Posts: 3

Thank You I will certainly relay the suggestion to my husband we are trying anything.. He is having a new Crank position Sensor and a Cam Shaft Sensor replaced to see if that will make a difference.
Again Thank You for your suggestion.


share Top of the page Bottom of the page
horsey1
Reg. Dec 2004
Posted 2019-11-04 5:57 AM (#172821 - in reply to #172802)
Subject: RE: Jerking & bucking problems


Elite Veteran


Posts: 720
500100100
Reading your first post, as far as truck or brakes go you have 2 issues. You list one under acceleration, and one when braking. Frankly I cannot imagine the truck's drivetrain causing the one under braking. Frame, hitrch, or such- sure. So I'd start with Paul's suggestion, and then get into some sensible troubleshooting before throwing a bunch of parts at it.  
share Top of the page Bottom of the page
Kay
Reg. Oct 2003
Posted 2019-11-04 8:25 AM (#172823 - in reply to #172802)
Subject: RE: Jerking & bucking problems


Extreme Veteran


Posts: 534
50025
Location: Zionsville, Indiana
Please, please have someone who knows what they are looking at inspect the gooseneck structure. Failures have occurred for various reasons - broken welds, rusted through material, etc. Have the entire structure, from the ball to the lower front of the frame. gone over inch by inch. There are lots of possibilities with all of the welded joints and connections.
share Top of the page Bottom of the page
loveduffy
Reg. Feb 2006
Posted 2019-11-15 9:50 AM (#172836 - in reply to #172802)
Subject: RE: Jerking & bucking problems



Expert


Posts: 1871
10005001001001002525
Location: NY
To me it sound like the brack box is not working right . I had this happen and replace the brack box and it was fix  
share Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread
Message format
 

'
Registered to: Horse Trailer World
(Delete all cookies set by this site)