Electric jack for gooseneck horse trailer.
RAMartin
Reg. Mar 2022
Posted 2022-04-14 11:22 AM (#185238)
Subject: Electric jack for gooseneck horse trailer.


New User


Posts: 3

My trailer has an electric jack made by Equalizer Systems. The gearbox is starting to slip and it is no longer supported by the manufacturer. I’m interested to know if there are any used/salvaged gearboxes or gearbox and motor combos available out there.
I have included a picture.
share Top of the page Bottom of the page
RAMartin
Reg. Mar 2022
Posted 2022-04-14 12:23 PM (#185239 - in reply to #185238)
Subject: RE: Electric jack for gooseneck horse trailer.


New User


Posts: 3

Trying the picture again.



Attachments
----------------
Attachments 9CF76AA4-14F4-4F3A-808F-D3DD4FDF039A.jpeg (80KB - 12 downloads)
share Top of the page Bottom of the page
hosspuller
Reg. Oct 2003
Posted 2022-04-15 7:28 PM (#185240 - in reply to #185238)
Subject: RE: Electric jack for gooseneck horse trailer.


Expert


Posts: 2953
20005001001001001002525
Location: North Carolina		Gears don't slip. Either the shaft is loose on motor or jack. Check to be sure. If the gears have been striped, a machine shop can fit new gears to the unit.

You'll have to weigh the cost vs a new drive unit.

There are several similar jack units... driving the jack shaft. Here's one ...

https://www.trailerjacks.com/Bulldog-12000-lbs-Electric-Powered-Driv...

Edited by hosspuller 2022-04-15 7:34 PM
share Top of the page Bottom of the page
RAMartin
Reg. Mar 2022
Posted 2022-04-20 8:59 AM (#185244 - in reply to #185238)
Subject: RE: Electric jack for gooseneck horse trailer.


New User


Posts: 3

Thank you for your response.
share Top of the page Bottom of the page