Trailer a bit too large for pony
Gwen7_22
Reg. Jan 2021
Posted 2021-01-16 5:36 PM (#173420)
Subject: Trailer a bit too large for pony


New User


Posts: 2

I have a hawk 2H straightload, regular sized (not oversized). I have a Morgan pony who is 14h and narrow. She occasionally scrambles when turning left. The partition is not full length and the trailer just seems a bit too long and wide. Sometimes I see scuff marks on the mat under the center divider.

I used to trailer her in a Kingston 2H that was shorter and narrower with a stud wall. She never scrambled in it.

Would retrofitting a stud wall in my current trailer provide her with more stability? Is there any padding I could add to make it more narrow?
share Top of the page Bottom of the page
HappyTrailsTrailers
Reg. Apr 2016
Posted 2021-01-17 6:53 AM (#173421 - in reply to #173420)
Subject: RE: Trailer a bit too large for pony


Member


Posts: 17

Hello - 
move pony to ditch side stall - ( and perhaps - call Hawk with your VIN # and ask them for make you an adjustable butt bar bracket set up for height ) Moving pony will probably work based on your scrambling to the right despcription -  she can brace on the wall instead of scramble on the hanging mat
Risa 
share Top of the page Bottom of the page
Gwen7_22
Reg. Jan 2021
Posted 2021-01-31 7:54 AM (#173461 - in reply to #173420)
Subject: RE: Trailer a bit too large for pony


New User


Posts: 2

Thanks I’ll give that a try first!
share Top of the page Bottom of the page