adding windows to a slide out
nsjunk
Reg. Dec 2015
Posted 2018-04-02 12:25 AM (#171484)
Subject: adding windows to a slide out


Member


Posts: 6

Location: California		is it possible to add two side windows to a existing trailers slide out ?
share Top of the page Bottom of the page
Cutter1999
Reg. Jan 2017
Posted 2018-04-02 10:01 AM (#171485 - in reply to #171484)
Subject: RE: adding windows to a slide out


Veteran


Posts: 100
100
Location: Waaaaay back Slaughter Hollow		Anything is possible if you have enough money!
share Top of the page Bottom of the page
RTSmith
Reg. Nov 2003
Posted 2018-04-04 11:52 AM (#171489 - in reply to #171484)
Subject: RE: adding windows to a slide out


Elite Veteran


Posts: 785
500100100252525
Location: Tenn/Ala.		Cutter is pretty close on this one. Yes, you can. You don't mention brand, but most slideout rooms need to be fairly stiff, so any windows were framed in when it was built. Adding them will involve removing enough of the interior to cut the hole, build and place a frame, and weld it all together. Then set the window, reinstall the interior, adding the proper blinds for the new window. 
share Top of the page Bottom of the page
PaulChristenson
Reg. Jan 2007
Posted 2018-04-08 12:48 AM (#171497 - in reply to #171484)
Subject: RE: adding windows to a slide out


Expert


Posts: 3853
200010005001001001002525
Location: Vermont		Are you talking about adding windows to the external side of the slideout unit...OR to the walls of the slideout that are exposed when the slide is extended?? 

Edited by PaulChristenson 2018-04-08 12:49 AM
share Top of the page Bottom of the page