|
|
New User
Posts: 1
| Hi everybody!
I've got a 1998 Sooner 3 Horse that I took to the truck wash today and now the aluminum is showing through. I'm not sure if the clear Coat aged overtime or what happened exactly. It had a white powdery feel when you would run your fingers across it, so I thought taking it through the truck wash would help it; well it only made it worse! I'll attach a picture below.
My question is would I be better off getting it repainted or vinyl wrapped? I was wanting to sell it so I need the most cost effective solution. Im located in Weatherford, TX so surely someone in the area offers this service...ANY advice would be greatly appreciated ??
(IMG_4158.JPG)
Attachments ---------------- IMG_4158.JPG (24KB - 6 downloads)
|
|
|
|
Veteran
Posts: 113
Location: Wi | I can't tell from the picture if is bare aluminum or white skinned (painted aluminum). If it is bare aluminum I would get it acid washed. If it is white skinned it would need to be repainted or wrapped. I am not a fan of wrapping a horse trailer. If you tie a horse to the trailer the wrap will surely be ruined. A good quality wrap is going to cost you $8-10 per sq foot for the print and installation. (your area may be different). I do not know what a paint shop would charge, but in my opinion that would give you the best bang for the buck. |
|
|
|
Elite Veteran
Posts: 787
Location: Tenn/Ala. | It certainly looks as if this was a white trailer. Because of UV damage, lack of proper care, and time- the paint has basically washed off of the trailer. I can't speak to a wrap. Painting is possible, but I believe you'll find it prohibitively expensive. As there are more older trailers our there, this is becomming a more common sight, that has no easy (read- inexpensive) answer. Most folks are just pulling them as they are. |
|
|
|
Veteran
Posts: 113
Location: Wi | Maybe an option would be to strip the paint, acid wash and then put cut vinyl (like what is on there, not a wrap). I am not in the paint/paint stripping business so have no idea on what that would cost. I am in the wrap business so can comment on that with some knowledge. |
|
|