Trail-et accessory
Bill M
Reg. Feb 2016
Posted 2016-02-20 8:09 PM (#166181)
Subject: Trail-et accessory


New User


Posts: 3

Location: Newberg, Oregon		I just bought a 1988 Trail-et 2 horse bumper pull, straight load. On the inside of each escape door there is a welded steel pocket about 6" wide and 3/8" deep. Does anyone know what those are for? There are 4 brackets at the front of each stall to clip on a canvas manger. These are in addition to those.Thanks,Bill M
share Top of the page Bottom of the page
PaulChristenson
Reg. Jan 2007
Posted 2016-02-20 9:03 PM (#166182 - in reply to #166181)
Subject: RE: Trail-et accessory


Expert


Posts: 3853
200010005001001001002525
Location: Vermont		Where are these pockets in reference to the chest bars?
share Top of the page Bottom of the page
cutter99
Reg. Sep 2007
Posted 2016-02-21 3:46 PM (#166184 - in reply to #166181)
Subject: RE: Trail-et accessory


Extreme Veteran


Posts: 430
10010010010025
Location: TN		Can you post a picture of the pockets?
share Top of the page Bottom of the page
Jbsny
Reg. Apr 2004
Posted 2016-02-28 5:10 PM (#166254 - in reply to #166181)
Subject: RE: Trail-et accessory


Extreme Veteran


Posts: 333
10010010025
I had a trailet and on the door was a metal bucket holder. There was a pin at the bottom where I could pull up the pin and put a bucket handle. https://www.valleyvet.com/ct_detail.html?pgguid=30e07416-7b6a-11d5-a...
share Top of the page Bottom of the page
Bill M
Reg. Feb 2016
Posted 2016-03-05 7:25 PM (#166373 - in reply to #166182)
Subject: RE: Trail-et accessory


New User


Posts: 3

Location: Newberg, Oregon		They are on the doors themselves forward of the chest bars about in the middle of the escape doors and about the same height as the chest bars.Thanks, Bill M
share Top of the page Bottom of the page