2000 trails west sante fe BP
dbxdiver
Reg. Jun 2008
Posted 2008-06-15 10:27 PM (#85721)
Subject: 2000 trails west sante fe BP


New User


Posts: 2

Location: victoria BC		wondering if anyone can help me with an electrical schematic for this trailer the interior tackroom and horse area lights do not work, all other lights marker turn etc work fine. bulbs are fine

Edited by dbxdiver 2008-06-15 10:30 PM
share Top of the page Bottom of the page
chadsalt
Reg. Nov 2004
Posted 2008-06-16 6:43 AM (#85729 - in reply to #85721)
Subject: RE: 2000 trails west sante fe BP


Expert


Posts: 1416
1000100100100100
Location: sc		Got power FROM the truck?
share Top of the page Bottom of the page
gard
Reg. Aug 2007
Posted 2008-06-16 8:06 AM (#85732 - in reply to #85721)
Subject: RE: 2000 trails west sante fe BP


Expert


Posts: 5870
50005001001001002525
Location: western PA

Most trucks have an aux circuit that powers the interior lights separately from the running lights. If this fuse is blown, you won't have this circuit available. On Ford SDs, it is in the engine compartment above the drivers feet in a small fuse box.

Also, with the SD diesels, the engine has to be running for the circuit to be powered.

Gard

share Top of the page Bottom of the page
dbxdiver
Reg. Jun 2008
Posted 2008-06-17 11:42 PM (#85878 - in reply to #85732)
Subject: RE: 2000 trails west sante fe BP


New User


Posts: 2

Location: victoria BC		thanks you were correct the truck did have to be running, wierd but true but not for long getting that changed soonest.

thanks again

Dan Bewsher
share Top of the page Bottom of the page