Expert
Posts: 3853
Location: Vermont | Originally written by jrwest2 on 2008-04-18 3:54 PM
I just bought a new trailer Fith Wheel trailer and hauled it the other day everything works fine but when i apply the brakes my lights go out. I have a 2008 f-350 and it tells me my trailer plug has disconnect but everything seems fine. Is it that my trailer is not grounding properly Are you blowing fuses? If so, you are looking for a short to ground in your trailer wiring most likely. Take your voltmeter, put it on ohms and check for continuity from your leads to the trailer chassis. Only one should read zero ohms, the wihte one usually. If any of the others do read zero ohms then you have a short that is blowing you fuses. |