Moving an Awning
bechack
Reg. Mar 2006
Posted 2008-01-09 5:52 PM (#74119)
Subject: Moving an Awning


Veteran


Posts: 134
10025
Location: Coarsegold, CA

OK, the awning position is just wrong on my trailer.  It is a Carefree Awning.  From looking at it, I can take out the screws at the bottom, loosen what looks like set screws at the top and just slide the thing down the gutter, then reattach the bottom.  Is this all there is to it?  I would really like to get it moved before summer and awning season.

 

 

share Top of the page Bottom of the page
HWBar
Reg. Nov 2005
Posted 2008-01-09 6:22 PM (#74120 - in reply to #74119)
Subject: RE: Moving an Awning



Expert


Posts: 1283
1000100100252525
Location: Home of Wild Turkey Whiskey		That's it, just make sure where you are going to re-attach it that the bottom screws have something to bite into. Some aluminum skin trailers, the skin is not enough to support the awning. Also make sure you put the little set screws back in the rail or your awning will slide and roll up crooked.

Edited by HWBar 2008-01-09 6:24 PM
share Top of the page Bottom of the page
bechack
Reg. Mar 2006
Posted 2008-01-10 7:42 PM (#74185 - in reply to #74119)
Subject: RE: Moving an Awning


Veteran


Posts: 134
10025
Location: Coarsegold, CA

Thanks.   Nope, the bottom will screw in to the bottom frame rail.  Should be solid enough.

 

 

share Top of the page Bottom of the page