|
|
Extreme Veteran
Posts: 333
| My friend has a 1994 or 96 (not sure) Featherlite 2 horse slant. On her last trip, she lost the crank for the foot. She called a Featherlite dealer who said they didn't make those anymore and that they are special make items. Could this be true? If so, where could she get one? She can't get the trailer off the truck!!! Jbsny |
|
|
|
Member
Posts: 22
Location: Little Britain, Ontario, Canada | Howdy! Call Featherlite Factory not a dealer, they will have a better idea if they can find one. If they can't find one go to a welding shop in the area and have one made. GOOD LUCK |
|
|
|
Member
Posts: 31
Location: nevada | Most trailer jacks are not made by the trailer company.Ilost my handle and went to a dealer of assorted trailers and they matched one up.But my trailer was stuck on my truck also and I found that my trucks lug nut wrench fit the trailer jack also just luck I guess. |
|
|
|
Expert
Posts: 2689
| If it is a Bulldog brand jack the chances are good that 4-Star can help you, at a reasonable price too.
As I've said before, they will sell parts and materials directly from the factory, you don't have to go through a dealer, you don't have to prove ownership of a 4-Star trailer. |
|
|
|
Extreme Veteran
Posts: 333
| Thanks, I sent my friend this thread. We also have a 4 Star dealer handy so maybe he can help her out. Appreciate the answers!! Jbsny |
|
|
|
Extreme Veteran
Posts: 524
Location: Lone Oak, Tx | Get yourself, or in this case your friend, an 18 or 24volt drill and read this post. much easier on the back.
http://www.horsetrailerworld.com/forum/thread-view.asp?threadid=290...
Or if your friend is able, try this: http://www.horsetrailerworld.com/forum/thread-view.asp?threadid=437...
Edited by maccwall 2006-10-02 1:12 PM
|
|
|
|
Elite Veteran
Posts: 671
Location: THE GREAT NORTHWET, OREGON(THE REAL GODS COUNTRY) | You can take it off with a socket and breaker bar,or some 4 way lug wrenches fit the jack. |
|
|