|
|
New User
Posts: 3
Location: Mullica Hill, NJ | I have a 2004 Dodge ram 1500 4x4 w/5.7 Hemi.
I will purchase a 3H slant trailer.
Should I get a BP or a GN?
Thank you,
Nick |
|
|
|
 Elite Veteran
Posts: 671
    Location: THE GREAT NORTHWET, OREGON(THE REAL GODS COUNTRY) | Yea |
|
|
|
 Elite Veteran
Posts: 671
    Location: THE GREAT NORTHWET, OREGON(THE REAL GODS COUNTRY) | Depends on your budget and preferences.They bith have pros and cons.I prefer goosenecks. |
|
|
|
 Expert
Posts: 2453
       Location: Northern Utah | Having owned several GN, I'll never go back to a BP unless I have no other option. There isn't that much difference in weight ( for the same size trailer) But people tend to get a slightly bigger trailer when they go GN. A Classic, Exiss, Fetherlite, Aluminum 3hrs GN will weigh in under 5000lbs empty. Add three 1000 horses and some gear and you will weigh around 9000 lbs loaded. Check you trucks owners manual and see if it is rated for this weight. I had a 97 F250 ( The beefed up F150 body style)with the 5.4L engine and I pulled a 3 horse Steel bumper pull for 3 years. It worked hard on the 7% grades. But was just fine on the flat. |
|
|
|
 Elite Veteran
Posts: 662
    Location: Vanzant, Missouri | I agree with Painted Horse..... Sure you want to pull a 3h with a 1500 Ram? I have one and hooked it up to my 3h SL Exiss and empty it put some strain on the truck....I use a F250 SD CC 5.4L and it does ok except on the steeper grades it strains some. GN is the way to go.... |
|
|
|
New User
Posts: 3
Location: Mullica Hill, NJ | Thank you for the replies.
The pulling power "may" be OK, but I'll need to check out the suspension equation and see if the Ram can handle it.
Again, Thank You for your opinions.
Nick |
|
|
|
Veteran
Posts: 282
     Location: southcentral pennsylvania | You may want to check out your vehicle's gross combine weight rating (GCWR). Since it is a 4X4, your towing numbers are little lower because of the 4 wheel drive. I would also be concerned about braking ability, strain on the transmission, etc., with a 1500 and a 3 horse gooseneck. Margins of safety are paramount for me. I suspect you will be "on the edge" with your numbers. I pulled a 2 horse gooseneck with a 1500 for a very short time, and quickly remedied my mistake. Just my 2 cents! Brenda |
|
|
|
New User
Posts: 3
Location: Mullica Hill, NJ | Brenda,
Very valid points.
Thank you,
Nick |
|
|