We are in the process of the WLD. After quotes of $800-&1,200 we decided to experiment and use my Father's welding abilities. We have the materials to finish it but dad left on vacation in the middle of the project. We wanted the WTD though so we could set up a cowboy shower and porta potty in the fist stall once we get situated and so there was somewhere for the kids when we used it as a 4-wheeler trailer. The rivets out to take out the panel to cut hole cut out Ready to cut otherside We just went along with a wall unit. It is such a small area to cool and to purchase a $500 ac unit vs a $90 ac unit we figured we could spend the extra $400 somewhere else. We will come back and finish it in wood trim once we get to that point. line drawn ohmigosh look at that hole installed inside installed outside This is what we hope the finished project will look similar to, except we hope to have a little two burner gas stove also. Will we use it? Probably not but it will finish the package out. We have found some great mini items that should fit nicely. The trailer came with this cabinet set in it but it does not work into our plans. We plan to put a corner cabinet, floor to ceiling, in the the slant corner. And a small narrow boot box under the ac to store the 12volt stuff. |