|
|
Member
Posts: 11
| Where should I carry my 21' box gn horsetrailer to grease the wheel bearings? Also to have the electric breaks checked. This is a S&h 3 horse, gn, 1999. When I bought it I was told the bearings had been inspected and greased a year ago. I don't believe those lugs have been off since it was made, by looking at them. I'm not ready for a frozeup bearing. I want it safe. After the lie about the bearings I want the break system checked also. Thanks for any and all information. My husband is not a horse person, so I'm on my on. This site is wonderful and has helped me so much already. |
|
| |
|
Veteran
Posts: 108
Location: Lawrence KS | Is there a trailer service center nearby? It does not have to be a Horse Trailer dealer, An eqiptment or farm type trailer dealer will probably have a service center. The axles, bearings and brakes will be the same. Schedule an appointment and have them inspect it - sounds like it may need tires too. |
|
| |
|
Veteran
Posts: 233
Location: Pataskala, Ohio | An RV dealer could help you with both as well. |
|
| |
|
Extreme Veteran
Posts: 350
Location: Penrose, Colorado | where ever you take it get an esitimate on cost, a friend of mine that does not know much about things like that spent over $700 on the same thing your talking about and there was no parts involved. I would think $150 you should be the most it should cost. I would get a friend that is mechanically inclinded to help you do it yourself and save some money and teach you how to do it yourself. |
|
| |
|
Member
Posts: 11
| 3 months ago I bought this trailer, the guy that sold it to me said he had just repacked the bearings and that breaks was in good working order. I had them checked, I kept worrying about them. Here's a picture of them or rather what was left of them. Upper left shoes fell out, 1 on upper right and one on lower left, no pad for quiet a while, one on lower left, tiny bit of pad. My truck was doing all the stopping. Guess he doesn't have much respect for anyone's life. Couldn't post pic, file too large.
Edited by Anix 2016-09-01 11:42 AM
|
|
| |
|
| You really need to learn to do this stuff yourself. It is not hard. |
|
| |
|
Expert
Posts: 2957
 
Location: North Carolina | Anix ... I'm glad you had your brakes checked  I've two questions ... Why didn't the first place or person that checked your trailer find these problems... ? The only way to check bearings is to pull the hubs off. Then the inside bearing is hidden by a grease seal. I suspect this was NOT done. And what made you decide to have someone else check the trailer ? |
|
| |
|
| You really need to learn to do this stuff yourself. It is not hard. |
|
| |
Wheel bearings
