|
|
New User
Posts: 1
Location: Colorado | Just bought a 1993, trails west, sierra 2, 3 horse slant bumper pull. It is a WB size. It is covered in rust and will need new skins for sure, new hinges, handles/locks on tack rooms. Has some fender damage as well. I need help finding skins for it or an alternative to skins, what locking door handles to use and so on. Any info/ advice would be wonderful, I am all ears. Been a horse owner for 8 years and this is my first trailer, Money is tight so easiest, cheapest way is best for now. |
|
| |
|
Expert
Posts: 5870
   
Location: western PA | You can find many materials and expertise at fabrication shops. They are experts and have access to the materials you will need in your renovation. They can pre-form the panels and cut materials to size, difficult procedures to attempt without access to expensive, industrial machinery. |
|
| |
|
Expert
Posts: 3853
 
Location: Vermont | You are going to discover unless you can do the repair work yourself...it is going to be a rather expensive exercise... |
|
| |
|
Extreme Veteran
Posts: 350
Location: Penrose, Colorado | where in Co. are you located? excellent parts source in Canon City, if the trailer is rusty and not eaten through it sounds to me like a sand blast job and paint is in order and that is not near as expensive as replacing parts. hinges and door locks are had at about any rv dealer if you do not want to order them. |
|
| |
|
Expert
Posts: 1989
Location: South Central OK | You may find that the deal you got on the trailer wasn't such a deal. |
|
| |
Fixing Up a Trailer. Help/ Advice needed
