Folding Step Latch
HrsLvr10
Reg. Sep 2014
Posted 2014-09-29 8:29 AM (#160958)
Subject: Folding Step Latch


New User


Posts: 1

Location: Ontario CANADA		I just purchased a new Cimarron WB 2hrs trailer and ABSOLUTELY love it….one small thing….the folding aluminum step leading to the tack area sometimes pops down when driving across uneven ground. It has a factory installed rubber 'plunger' - type latch right now. I'm considering installing a latch from the side of the step to the tongue. Anyone ever done this? I found a latch on-line that swivels so thought that perhaps was my best choice to accommodate the area I'm looking to install it. I have contacted Cimarron - just waiting for a response/solution. Any input would be greatly appreciated!
share Top of the page Bottom of the page
Spin Doctor
Reg. Nov 2008
Posted 2014-09-30 1:06 PM (#160978 - in reply to #160958)
Subject: RE: Folding Step Latch


Extreme Veteran


Posts: 402
100100100100
Location: Valentine, NE		I would make sure the socket is tight. Sometimes, you can tighten up the bolt holding it on and that will make it tighter on the plunger.

If that doesn't or can't work, they are easy to replace.

Link to their site---
http://cimarrontrailers.com/online-parts-store-2/holdback/

Good luck!
share Top of the page Bottom of the page