What to use.
Mulemom503
Reg. Jun 2014
Posted 2014-06-18 11:53 AM (#159532)
Subject: What to use.


New User


Posts: 1

Location: Damascus, OR		What kind of bolts or screws should I use to install my Cam Latch Hasp onto my horse trailers back doors?
share Top of the page Bottom of the page
PDGx
Reg. Jul 2011
Posted 2014-06-18 5:17 PM (#159534 - in reply to #159532)
Subject: RE: What to use.



Veteran


Posts: 175
100252525
Location: Florida		I'd suggest Grade 8 (stainless) bolts. A couple of years ago I lost a cam lever when the original bolt broke. Have since replaced with Grade 8 bolts. If you don't have a source in mind, Menards and TSC do have a selection.
share Top of the page Bottom of the page
trbomax
Reg. May 2014
Posted 2014-06-18 7:24 PM (#159535 - in reply to #159532)
Subject: RE: What to use.


Regular


Posts: 97
252525
Location: mancelona michigan		 Stainless is definitly the way to go,but there are no gr 8 stailess fasteners.Stainless fasteners fall some where between gr 4 and 3,they actually do not sarry a "grade " mark.
share Top of the page Bottom of the page
tobruk
Reg. Oct 2003
Posted 2014-06-18 8:29 PM (#159537 - in reply to #159532)
Subject: RE: What to use.


Veteran


Posts: 197
100252525
Location: White Pine, TN		Go to your local Fastenal store, they're the experts on fasteners of all kinds and sizes.
share Top of the page Bottom of the page