|
|
New User
Posts: 2
Location: Raleigh nc | Hello, just joined the forums but have found it so usefull many times :)I just purchased a two horse 2002 4 Star trailer yesterday. It has the WERM flooring which is pulling up in the 1st horse stall at the front of where the horse stands. Should not have any urine issues underneath but was wondering if I could just hose it out as best I can then glue it down when dry and what type of glue would hold it on the aluminum floor?Thank you in advance for any advice! |
|
| |
|
 Veteran
Posts: 259
 
Location: Topeka Ks | When I looked into the WERM floor the manufacture said it was lifetime guarantee. Might look for a dealer and have them look at it. If their no help I would use DAP Contact Cement Adhesive it can be found at Lowes. |
|
| |
|
Location: Texas | They probably didn't apply a good bonding primer first. None of the bedliner type products will adhere to the bare aluminum for very long without bonding primer. |
|
| |
|
Location: Tulsa, OK | Was the floor installed by a WERM dealer, trailer manufacturer or WERM company?
Edited by trailerconsult1 2014-02-04 7:29 AM
|
|
| |
|
New User
Posts: 2
Location: Raleigh nc | I have no idea who actually installed the flooring but think it has been in the trailer since new (2002). It has the WERM logo on the back of the trailer. I did email the place that the trailer originally came from which is also a WERM dealer and also emailed the WERM manufacturer. As of yet, I havnt heard back from anyone. I certainly am not expecting much as I do realize the trailer is 12 years old and am happy to make the repair myself but wanted to make sure I use the appropriate adhesive. Thank you for your responses :) |
|
| |
WERM flooring coming up
