|
|
New User
Posts: 3
Location: Oregon | I have an 2008 Keifer Built 4-horse aluminum trailer with the front being completely bare. I would like to convert this to at least a weekender type trailer. I would like to insulate, wire for electricity & propane (absolutely want heat on a thermostat), and possibly include a shower/toilet combo that fits in the slant corner.
Does anyone know of a place that does this type of conversion in Oregon or Washington? Or, where would I go to to get all of the parts/supplies for the interior?
Or am I just crazy to want to do this? I love my trailer and don't want to get rid of it, but can't afford to buy another trailer with all of the amenities I would like.
Thank you for all of your advice. I really appreciate it. | |
| | |
 Veteran
Posts: 175
 
Location: Florida | No you're not crazy. It's done frequently. Don't know who does it out in your territory, but if you decide to do it yourself, do some searches on this site for conversions, as well as look at other trailers an manufacturers for ideas. Take plenty of time to plan what you want to end up with, whether you have it done or do it yourself. Depending on how large your living area is, will determine what you can accomplish and get into it.If you decide to do it yourself, you can purchase just about anything you want from the many RV parts suppliers on the web, or thru EBay stores. Just do searches on your needs and you will find many options. You will need to do some exacting measurements to get everything to fit in the confined space you have available. But very doable. Ours is a 7' short wall with door on the left.It took about 4 months of part time work and about 7.5k in new components to add hot water, refrig/freezer, water and waste tanks, shower, sinks, toilet, AC/Heat, vents and completely insulate, wire, plumb and finish the entire area. I also made all the cabinets except 3.It makes day and weekend outings much more pleasant. | |
| | |
Extreme Veteran
Posts: 430
Location: TN | PDGx- Awesome job! Really, really nice!!! | |
| | |
Veteran
Posts: 122
Location: Monroe, WA | Here is a great group where many are doing their own conversion and have lots of tips and links where to get stuff.
https://www.facebook.com/groups/565970220097130/ | |
| | |
New User
Posts: 3
Location: Oregon | That is absolutely gorgeous! You did a great job. I do know what I want and I have it planned in my mind. What RV suppliers did you use? I am looking for one of those raised shower/toilet combos that is angled to fit in the corner of the slant. I only have a 4' short wall but the long wall is close to 7-8'. | |
| | |
New User
Posts: 3
Location: Oregon | Thank you Slidinspots! I didn't even think of Facebook!
| |
| | |
Regular
Posts: 63
Location: suffolk | here you go : http://todd.redwrench.com/ | |
| | |
Veteran
Posts: 175
Location: Florida | Jazzsales had the only shower for the slant wall angle, however it was very narrow. I 'tried' one out at a used trailer dealer, and you would have to stand sideways in it. It was not a combo unit. We went with a separate DuoForm NeoAngle shower and a standard Thetford toilet, but the 3' additional space allowed for it. You may have to combine them. Suppliers were from all over. I would suggest you do searches on the Inet and EBay, beginning with 'RV'-shower, lights, tanks, refrigerator, microwave, sinks, etc. Pay attention to all dimensions and specs to get what you really want. The list of suppliers is tremendous, and you will be surprised that online purchases for the same products (including freight) are better than local RV shops. All of our insulation, lumber, paneling, ceiling, plumbing, wiring, oak, and cabinet doors came from Menards. The water heater is a Suburban 6 gal 110v/LP, refrigerator - Norcold 110v or 12v, AC/Heat - Dometic. Everything you need is available from many suppliers. If you are looking for something specific, post it here and we can look it up. Also, take your 'plan' and draw it out - in scale - then mock it up in the trailer using, cardboard boxes, 2x2's, etc. You will modify your plan continuously as you are doing your build, but you must have a plan to make sure wiring, plumbing, vents, etc., fit the structure, and space available. | |
| |
|
Trailer Conversion Questions
