Trailer GVW
Runtoledo
Reg. Jun 2010
Posted 2014-01-05 12:53 PM (#156684)
Subject: Trailer GVW


New User


Posts: 2

Location: Colorado
I'm new to this forum and hoping someone can help. I am trying to get a guesstimate of the weight of my trailer without having to take everything out and taking it to a scale. I am hoping someone on here can help or get me pretty close. I have a '99 3H GN Trailet, steel frame with double walled aluminum skin and a fiberglass roof, 4 foot short wall. If anyone has any idea or close idea of what this thing may weigh I would appreciate the info, thank you.
share Top of the page Bottom of the page
hosspuller
Reg. Oct 2003
Posted 2014-01-05 4:36 PM (#156687 - in reply to #156684)
Subject: RE: Trailer GVW


Expert


Posts: 2957
20005001001001001002525
Location: North Carolina

Welcome to the forum ... I question any answer you might get for a trailer weight.  Trailers are too variable even from the same manufacturer.   Also why do you want a stripped weight?  You actually want a loaded weight if you're looking to check weight ratings or tire ratings.

For $8.00 and a bit of time, I'd rather take the loaded trailer to a scale.

share Top of the page Bottom of the page
goz63
Reg. Dec 2011
Posted 2014-01-05 5:46 PM (#156689 - in reply to #156684)
Subject: RE: Trailer GVW



Veteran


Posts: 218
100100
Location: Ohio
Gotta support Hosspuller on this one...best to get an accurate weight on YOUR trailer.

Edited by goz63 2014-01-05 5:47 PM
share Top of the page Bottom of the page
Runtoledo
Reg. Jun 2010
Posted 2014-01-05 5:53 PM (#156690 - in reply to #156684)
Subject: RE: Trailer GVW


New User


Posts: 2

Location: Colorado
Ok thank you. Good suggestion on getting the weight with it loaded. Much appreciated. :)
share Top of the page Bottom of the page
windy
Reg. Oct 2004
Posted 2014-01-05 8:31 PM (#156693 - in reply to #156684)
Subject: RE: Trailer GVW





100
Location: Colorado
You can weigh your whole rig(truck and trailer), and then unhook and just weigh your truck. Subtract that from the weight of your whole rig, and it will give you your trailer weight. It would also be good for you to know the weight of rear axle of your towing rig when you're hooked up and your trailer is loaded, and also just your trailer axles weight, again loaded. That way you can see if you're kind of close to the manufacturer's axle weight ratings.
share Top of the page Bottom of the page
PaulChristenson
Reg. Jan 2007
Posted 2014-01-05 10:14 PM (#156694 - in reply to #156684)
Subject: RE: Trailer GVW


Expert


Posts: 3853
200010005001001001002525
Location: Vermont
And if you have a CAT scale in your area, you can get your axle weights while you're still hooked up...:) http://catscale.com/how-to-weigh
share Top of the page Bottom of the page
hosspuller
Reg. Oct 2003
Posted 2014-01-06 12:45 PM (#156708 - in reply to #156684)
Subject: RE: Trailer GVW


Expert


Posts: 2957
20005001001001001002525
Location: North Carolina

Paul's suggestion on a CAT scale is right on.  With one weighing, you'll know each axle weight.  My scale experience was with a CAT scale.  We were on our way out, 3 horses, food & hay for a week, and full fuel tank.  I was surprised at how quickly everything added up.  18,000 pounds total

CAT scales are found at truck stops.  Look for the sign as in Paul's link.  His link is very informative for a first time weighing.



Edited by hosspuller 2014-01-06 12:48 PM
share Top of the page Bottom of the page