The latch on the dressing room of my 2000 Sooner stock trailer finally quit on me. All the replacements I've found online look smaller than the original which measures 5 3/4 x 5 3/4. Can anyone give me some advice on where to find a replacement? Thanks!!
Posted 2013-08-05 1:51 PM (#153840 - in reply to #153836) Subject: RE: Sooner Dressing Room Latch/Lock/Handle HELP!!
New User
Posts: 2
Location: NC
Here's a new issue...The replacement from Trimark has the deadbolt at the top and mine has the dead bolt on bottom. Anyone know if I can flip it around? That's probably a stupid question and I apologize in advance!
Posted 2013-08-08 10:59 AM (#153898 - in reply to #153836) Subject: RE: Sooner Dressing Room Latch/Lock/Handle HELP!!
Member
Posts: 9
Location: Winnie, Tx
I went to a local horse trailer sales that had parts. They had the exact door assembly that you could just buy the broken part. I needed the outside piece.
Posted 2013-08-08 5:43 PM (#153902 - in reply to #153840) Subject: RE: Sooner Dressing Room Latch/Lock/Handle HELP!!
Veteran
Posts: 203 Location: Lander WY
Originally written by Sally_Pearl on 2013-08-05 1:51 PM
Here's a new issue...The replacement from Trimark has the deadbolt at the top and mine has the dead bolt on bottom. Anyone know if I can flip it around? That's probably a stupid question and I apologize in advance!
I don't think that will work- the deadbolt is probably assembled with the striker plate on the lower location on the door jamb not the upper as well. I think it will be one or the other not both....
Sooner Dressing Room Latch/Lock/Handle HELP!!
