|
|
New User
Posts: 3
Location: MA | I recently lost a hub cab while driving on the worst PA "interstate", I84 westbound between Port Jervis, NJ and Scranton, PA. Does anyone know where I can order a new one and how to make sure I get the right one? |
|
| |
|
Expert
Posts: 5870
   
Location: western PA | When we bought our 4 Star, there were two missing hub caps. I bought a new set of four on EBay much less expensively than the two OEM replacements would have cost. There are probably a hundred styles available in every price range and size with some sites offering free shipping. They work well and are quite impressive, replicating aluminum wheels. I had a similar set on a steel stock trailer and they lasted many years when they were sold with the trailer. They also hold up well on the PA highways and we've never lost a replacement. |
|
| |
|
Expert
Posts: 3802
 
Location: Rocky Mount N.C. | You didn't if they are 15', 16' or 17.5' wheels... http://www.autoamenity.com/Wheel-Simulators/GQST50-Single-Wheel-Simulator.htm http://www.autoamenity.com/Wheel-Simulators/NST06-Single-Wheel-Simulator.htm http://www.autoamenity.com/Wheel-Simulators/Trailer-Wheel-Simulator.htm |
|
| |
|
Expert
Posts: 5870
Location: western PA | You didn't if they are 15', 16' or 17.5' wheels... ????????????????? |
|
| |
|
Expert
Posts: 3802
Location: Rocky Mount N.C. | You didn't SAY.... I left out the word SAY... This three minute time out sukz, specially when you're still partially asleep!! LOL!! |
|
| |
|
Expert
Posts: 3802
Location: Rocky Mount N.C. | Originally written by retento on 2013-05-19 9:19 AM You didn't SAY.... I left out the word SAY... This three minute time out sukz, specially when you're still partially asleep!! LOL!! See, did it again... 15", 16" or 17.5" wheels... We need some rain bad, think I'll kill a Black Snake and hang it in a tree... |
|
| |
|
 Extreme Veteran
Posts: 560
Location: Mena, AR | You can get a set of 4 bolt on hub cabs for about $220. I got my through a Big Tex Dealer. They looked great on my 4-Star and won't fall off. You can also find them on-line with little searching. |
|
| |
|
Expert
Posts: 5870
Location: western PA | If you want bolt on SIMMS instead of hubcaps: http://www.autoamenity.com/Wheel-Simulators/NST06-Single-Wheel-Simulator.htm |
|
| |
|
Member
Posts: 47
Location: Grayson Co. Texas | Call 4 Star and ask for parts. I got a set of 4 replacements for free due to a new design they use now. Mine's a 04 and the ones they used then had smaller holes in them. Bad habit of vibrating and moving into the valve stem. They sent me a entire new set. Recently, while in OKC for a barrel race, we went by there to see about some replacement slats for the butt side. I figured it would be really high, but the fact that I didn't have to buy a whole sheet and them cut them was worth the try. I walked out with a whole set of 4 pieces cut for me for $45.....Give them a try...at least you know they will fit.. |
|
| |
hub cap for 4 Star trailer
