New User
Posts: 3
Location: Franklin, TN | We just bought a used Featherlite with a 6' slide out. The slide was working fine but recently it will move a few inches and stop unless I help it by pushing as it moves.
Voltage is fine and there are no obstructions that I can see. When I use the manual crank it goes in and out just fine.
My plan is to clean all of the old grease off of the tracks and gears and re-apply an appropriate lube.
Those of you with experience with slide outs please chime in with suggestions and pointers. All info is welcomed.
Thanks,
Doug |
Slide out issues and questions
