How to make a stud wall?
Linda Y
Reg. May 2007
Posted 2012-08-20 5:26 PM (#146469)
Subject: How to make a stud wall?


Extreme Veteran


Posts: 342
10010010025
Location: MS		I have a 2 horse Exiss GN. I will only be hauling one horse, and thought it may be a good idea to make a stud wall so I can carry my extras in the first stall. How do I go about doing this? I have seen people make them out of very heavy plywood, but how is it fastened and what keeps it from swinging?
share Top of the page Bottom of the page
Linda Y
Reg. May 2007
Posted 2012-08-20 5:32 PM (#146470 - in reply to #146469)
Subject: RE: How to make a stud wall?


Extreme Veteran


Posts: 342
10010010025
Location: MS		Ah, never mind! I did a search and found the excellent article by Gard on how to make one!
share Top of the page Bottom of the page
graftonbabs
Reg. Sep 2012
Posted 2012-10-16 1:24 PM (#147691 - in reply to #146469)
Subject: RE: How to make a stud wall?



Member


Posts: 37
25
Location: USA		Hey Linda, this is Barbwire from the old Paso board.  I had the same question as you but couldn't find Gard's post.  Do you have a link, please?
share Top of the page Bottom of the page
graftonbabs
Reg. Sep 2012
Posted 2012-10-16 1:41 PM (#147692 - in reply to #146469)
Subject: RE: How to make a stud wall?



Member


Posts: 37
25
Location: USA		Oops, nevermind...I just found it.
share Top of the page Bottom of the page
blackcows
Reg. Mar 2010
Posted 2012-10-16 2:18 PM (#147693 - in reply to #146469)
Subject: RE: How to make a stud wall?


Extreme Veteran


Posts: 489
100100100100252525
I made mine out of the cheapest piece of plywood I could find, actually particle board.  I think it cost me less that $10.  I drilled a couple of holes and attached it with cable ties.  I actually prefer it to the factory made as it goes all the way to the ground so no shavings in my first stall.
share Top of the page Bottom of the page
captclank
Reg. Feb 2006
Posted 2012-10-16 3:34 PM (#147696 - in reply to #146469)
Subject: RE: How to make a stud wall?


Veteran


Posts: 116
100
Location: desert hills, az		Would you please post a link...I couldn't find the one you are talking about. thanks
share Top of the page Bottom of the page
rockyrider
Reg. Jun 2004
Posted 2012-10-17 5:16 AM (#147710 - in reply to #146469)
Subject: RE: How to make a stud wall?


Extreme Veteran


Posts: 304
100100100
I made mine out of 3/4 inch rubber stall mat.
share Top of the page Bottom of the page
farmbabe
Reg. Nov 2003
Posted 2012-10-17 10:27 AM (#147717 - in reply to #146469)
Subject: RE: How to make a stud wall?


Expert


Posts: 1723
1000500100100
Location: michigan		We used rubber stall mats. Drilled hole through the mat and into the divider and attached with carriage bolts. Its easy
share Top of the page Bottom of the page
Linda Y
Reg. May 2007
Posted 2012-10-17 5:38 PM (#147730 - in reply to #147691)
Subject: RE: How to make a stud wall?


Extreme Veteran


Posts: 342
10010010025
Location: MS		Hey, Barb! How are things? Still have the ponies? I think I just deleted a couple of photoshops that I did for you of them for Christmas a million years ago!
share Top of the page Bottom of the page
graftonbabs
Reg. Sep 2012
Posted 2012-10-17 5:49 PM (#147732 - in reply to #146469)
Subject: RE: How to make a stud wall?



Member


Posts: 37
25
Location: USA		I still have Amante and Raul and things are great.  I tried to PM you a few times here but so some reason it caused the site to crash on me.  ???

Edited by graftonbabs 2012-10-17 5:50 PM
share Top of the page Bottom of the page