Trailer divider/partition
cinnamon
Reg. Jul 2012
Posted 2012-07-13 11:05 AM (#145560)
Subject: Trailer divider/partition


New User


Posts: 2

Location: California		We have a two-horse slant trailer with no divider/partition. Can anyone recommend where to purchase one or have one made? I have been searching high and low with no success. I dont understand that you cannot purchase new dividers. Any ideas on how to make one?
share Top of the page Bottom of the page
AZgrulla
Reg. Jan 2009
Posted 2012-07-13 1:05 PM (#145563 - in reply to #145560)
Subject: RE: Trailer divider/partition



Veteran


Posts: 197
100252525
Location: AZ

If the trailer manufacturer is still in business, contact them..if not, then any metal fabricator can make one. you will have to take the trailer to them so they can get measurements.

 

 

share Top of the page Bottom of the page
cinnamon
Reg. Jul 2012
Posted 2012-07-13 4:59 PM (#145570 - in reply to #145560)
Subject: RE: Trailer divider/partition


New User


Posts: 2

Location: California		Thanks AZGrulia. I did contact the trailer manufacturer but no success. I will see if I can find a place nearby to make one for us.
share Top of the page Bottom of the page
bjhouten
Reg. Nov 2004
Posted 2012-07-16 8:47 AM (#145613 - in reply to #145560)
Subject: RE: Trailer divider/partition



Extreme Veteran


Posts: 560
5002525
Location: Mena, AR		When I got my used 2008 4-Star 2H GN I wanted a stud wall put in. The place that I happened to call had an extra Exiss divider left over that fit my trailer. They made me a really good deal on it, and it looks like it belongs.
share Top of the page Bottom of the page
colorlvr
Reg. Feb 2012
Posted 2012-07-16 10:53 AM (#145614 - in reply to #145560)
Subject: RE: Trailer divider/partition


Member


Posts: 7

Another possibility would be sealing a sheet of plywood and screwing it to the divider with self tapping screws. I've also saw people use mats as well.
share Top of the page Bottom of the page