Would it be crazy to consider . . . .
Sheryl
Reg. Oct 2003
Posted 2012-03-14 8:45 AM (#142069)
Subject: Would it be crazy to consider . . . .


Veteran


Posts: 233
10010025
Location: Tennessee
Unblocking trailer axles?

Edited by Sheryl 2012-03-14 8:46 AM
share Top of the page Bottom of the page
PaulChristenson
Reg. Jan 2007
Posted 2012-03-14 12:39 PM (#142080 - in reply to #142069)
Subject: RE: Would it be crazy to consider . . . .


Expert


Posts: 3853
200010005001001001002525
Location: Vermont
Originally written by Sheryl on 2012-03-14 8:45 AM

Unblocking trailer axles?
If it will still clear your truck's side rails or if you are going to a flat deck setup...I see no problem other than the costs...
share Top of the page Bottom of the page
loveduffy
Reg. Feb 2006
Posted 2012-03-15 10:14 AM (#142145 - in reply to #142069)
Subject: RE: Would it be crazy to consider . . . .



Expert


Posts: 1881
1000500100100100252525
Location: NY

why would you wont to ??

share Top of the page Bottom of the page
Sheryl
Reg. Oct 2003
Posted 2012-03-15 10:20 AM (#142147 - in reply to #142069)
Subject: RE: Would it be crazy to consider . . . .


Veteran


Posts: 233
10010025
Location: Tennessee

The prior owner had the axles blocked to accommodate their truck and then added a short ramp.  I do not have this problem with my truck. Due to the size, the ramp is too steep to be safe especially combined with new shavings kicked out upon exit. (my horse already slid down it the first time I used it) PLUS it is a huge PITA to me to have to lower the ramp everytime I want to open the back doors.

Also the fenders and wheels look strange all jacked up in the air like they are.



Edited by Sheryl 2012-03-15 10:22 AM
share Top of the page Bottom of the page
hosspuller
Reg. Oct 2003
Posted 2012-03-15 1:25 PM (#142154 - in reply to #142069)
Subject: RE: Would it be crazy to consider . . . .


Expert


Posts: 2958
20005001001001001002525
Location: North Carolina
Look to see if the blocks were welded to the axles and trailer or merely bolted.  If the blocks were bolted, the unblocking process is simple.   You may have to purchase new bolts for the shorter length.
share Top of the page Bottom of the page
cutter99
Reg. Sep 2007
Posted 2012-03-15 7:40 PM (#142167 - in reply to #142069)
Subject: RE: Would it be crazy to consider . . . .


Extreme Veteran


Posts: 430
10010010010025
Location: TN
No chance you can just remove the ramp?
share Top of the page Bottom of the page