|
|
Regular
Posts: 72
Location: Connecticut | I'm going to have new tires put on my Featherlite BP trailer this season. The wheels are rather crappy looking, the finish is chipping off, only eyesore on the trailer. I've been looking online for wheels, but they sure aren't cheap. I got a great price on the tires, and don't want it all to go out the back door for the wheels. Does anyone know any good websites to shop for reasonably priced wheels? Should I just order them from a Featherlite dealer? They are 15" 5 on 4 1/2 if that factors in at all.
thanks. |
|
| |
|
Expert
Posts: 5870
  
Location: western PA | Why not install SIMS or decent hub caps to improve the looks? A set of four is less expensive than new wheels. |
|
| |
|
Expert
Posts: 3802
 
Location: Rocky Mount N.C. | http://www.easternmarine.com/Trailer-Wheels-Rims/ |
|
| |
|
Extreme Veteran
Posts: 399
Location: Ottawa, Illinois 61350 | SIMS are a great way to go; but I think on 15" wheels, SIMS are only available as snap on type covers. We haven't had good luck with keeping these cpvers on the wheels. If you could get these in the two piece like the 16" and 17.5" type, I would say this is the way to go. You might want to put the two piece lexon plastic type on your wheels. They cover the entire wheel, but are much less money than the stainless steel simulators. |
|
| |
|
Expert
Posts: 5870
Location: western PA | http://www.autoamenity.com/Wheel-Simulators/Trailer-Wheel-Simulator.htm http://www.autoamenity.com/Custom/CustomTrailer.htm http://www.autoamenity.com/Custom/Custom15-1.htm |
|
| |
|
Member
Posts: 17
Location: Loveland, OH | I just got a spare tire rim from Featherlite for $35. If you just want a new set of the same thing. |
|
| |
|
Regular
Posts: 72
Location: Connecticut | tomole, how did you contact featherlite directly? The only way I can find is to go through my local dealer, and they want to charge me $45 for those cheap white ones. Another thought. What about just spray painting the ones that are there now with chrome paint? Has anyone done the $5.00 route? |
|
| |
|
Expert
Posts: 5870
Location: western PA | I've painted many wheels. By the time you include the labour of the preparation, the painting is the easy part. If you don't do an adequate job with an etching primer, the final paint coating often just peels off the cheap steel. I don't know what your time is worth for the hour and a half spent of labour on each rim. Adding in the cost of having each of the tires removed, remounted and balanced, and the cost of materials, the quoted $5 price seems a bargan. |
|
| |
Wheels for Featherlite
