|
|
Member
Posts: 5
| I have a F350 long-bed and pull a 4horse gooseneck trailer. I go over most dips and bumps in the road pretty well but when I hit a big one, not truck damaging big, It feels like my stem, the part of the trailer that connects to the ball, is bottoming out. Explained another way - there is no give when the trailer comes down on the bed. If it doesn't make sense what I'm saying and I'll try and make it more clear.
Thank you for the input! |
|
| |
|
Extreme Veteran
Posts: 342
 
Location: Ohio | Depnding on the size of your trailer, you could simply be hitting the overload springs or you could be bottoming out the suspension. Some more details on the truck and trailer may help.. Do you have any aftermarket suspension add ons? |
|
| |
|
Member
Posts: 5
| I don't have any after-market equipment. It's a not a large trailer or a living quarter trailer. Hitting the overload springs is a good bet but if I do start pulling a larger trailer it wouldn't be good.
Thank you for the input! |
|
| |
|
Extreme Veteran
Posts: 342
Location: Ohio | It may actually ride better with a heavier trailer. If the heavier trailer sits the truck down and compresses the overload springs, the ride will smooth out considerably instead of jolting when the overloads come in contact with the bumpers while pulling a lighter trailer. |
|
| |
|
Member
Posts: 5
| I have a heavier trailer I'll pulling soon and we'll see how it goes. I'll let you know the results. |
|
| |
|
Expert
Posts: 3853
  
Location: Vermont | Originally written by mom3463 on 2011-03-04 1:25 PM
I have a F350 long-bed and pull a 4horse gooseneck trailer. I go over most dips and bumps in the road pretty well but when I hit a big one, not truck damaging big, It feels like my stem, the part of the trailer that connects to the ball, is bottoming out. Explained another way - there is no give when the trailer comes down on the bed. If it doesn't make sense what I'm saying and I'll try and make it more clear.Thank you for the input! Look at the springs on the rear of your truck when the trailer is installed...are they almost FLAT across?...if so, you need to revisit your rear suspension
Edited by PaulChristenson 2011-03-04 3:13 PM
|
|
| |
|
Member
Posts: 5
| will do! |
|
| |
|
Expert
Posts: 5870
Location: western PA | You may need helper devices; air bags, overload springs, Timbrens |
|
| |
|
Member
Posts: 5
| Thank you! |
|
| |
Bottom Out
