EXISS 310/2002 Ford 350 SD
rickm
Reg. Jan 2011
Posted 2011-02-04 2:52 PM (#129798)
Subject: EXISS 310/2002 Ford 350 SD


New User


Posts: 1

So we are about to have a 2011 Exiss 310 LQ brought in.  I note on specs that that it is 60 inches off the ground in the front and am concerned about clearance off my truck rails.  Anyone have experience with this combo?
share Top of the page Bottom of the page
LonghornTRL
Reg. Mar 2008
Posted 2011-02-04 4:54 PM (#129803 - in reply to #129798)
Subject: RE: EXISS 310/2002 Ford 350 SD


Member


Posts: 16

Location: Hamlet, NC		I have a friend that I ride with and he has a Exiss 313 LQ and pulls it with a F-350. He has no problems but it is close to the rails , be carefull going in and out of steep areas. I pull a Elite 3H 12' LQ with a F-450 with the nose dropped 4" and I have to watch on steep areas. I only go into one place we ride at and I go at a angle when I go in and out.
share Top of the page Bottom of the page
hogtownboss
Reg. Sep 2008
Posted 2011-02-06 7:06 PM (#129846 - in reply to #129798)
Subject: RE: EXISS 310/2002 Ford 350 SD


Expert


Posts: 1351
10001001001002525
Location: Decatur, Texas

Originally written by rickm on 2011-02-04 2:52 PM

So we are about to have a 2011 Exiss 310 LQ brought in.  I note on specs that that it is 60 inches off the ground in the front and am concerned about clearance off my truck rails.  Anyone have experience with this combo?

A 2 wheel drive truck will have no problems, a 4x4 truck YES It will have a chance to hit the rails unless you have the tralier axles blocked.

share Top of the page Bottom of the page