|
|
Member
Posts: 46
Location: Wis. | We are currently remodeling our trailer and since our roof is not flat was are going to level the ceiling inside and am wondering about the air conditioner. How do we go about extending the clamping and venting so that it is flush to the new ceiling? I believe its a Coleman Mach 3 if that helps. |
|
| |
|
Expert
Posts: 3802
   
Location: Rocky Mount N.C. | Originally written by griffsmom on 2011-01-18 9:11 AM
We are currently remodeling our trailer and since our roof is not flat was are going to level the ceiling inside and am wondering about the air conditioner. How do we go about extending the clamping and venting so that it is flush to the new ceiling? I believe its a Coleman Mach 3 if that helps. Gaskets and wedges my help, not sure about longer fasteners.... http://www.pplmotorhomes.com/parts/rv-air-conditioners/rv-roof-ac-gasket.htm Check with your nearest RV dealer/installer. |
|
| |
|
Extreme Veteran
Posts: 406
Location: Minneapolis, MN | You will also need a new fabric duct. |
|
| |
|
Member
Posts: 46
Location: Wis. | Thank you, I do indeed need a fabric duct to extend it down to the new ceiling. Thanks. |
|
| |
Air Conditioner
