|
|
Member
Posts: 11
| I pulled my mats out and scrubbed my aluminum floor on my 2001 Barrett. There are just a few spots that have a little corrosion..no much. What should I do before I put my mats back in? Thanks! |
|
|
|
Expert
Posts: 5870
Location: western PA | Treat the floor with Muriatic Acid, flush with water, let dry and reinstall the mats. |
|
|
|
Member
Posts: 11
| Originally written by gard on 2010-07-20 8:13 AM Treat the floor with Muriatic Acid, flush with water, let dry and reinstall the mats. Thanks! I'm wondering if it would be worth having the Werm Flooring done? |
|
|
|
Expert
Posts: 5870
Location: western PA | Only you can decide the Werm's monitary value. For a fraction of its cost, you can treat and coat the aluminum flooring, and have an almost maintenance free usage. |
|
|
|
Member
Posts: 11
| Originally written by gard on 2010-07-20 4:18 PM
Only you can decide the Werm's monitary value. For a fraction of its cost, you can treat and coat the aluminum flooring, and have an almost maintenance free usage. Thanks for taking the time to answer my questions.. I can't place a monetary value on not worrying about my horse going through the floor.. What treatment etc.? |
|
|
|
Regular
Posts: 70
Location: PA | What would you use to coat the aluminum floor to make it maintenance free? How is it applied? |
|
|
|
Expert
Posts: 5870
Location: western PA | http://www.horsetrailerworld.com/forum/thread-view.asp?threadid=12471 |
|
|