Hello Blackcows... I'll take a shot at your questions Yes.. there are a multitude of battery monitors. But they all use voltage to determine the state of battery charge. You can save a bunch of cash with a digital multimeter that can do other jobs. All the answers to your other questions begin with "Depends: ..." Know that all batteries deteriorate with age and use. If you look at your batteries they will have an amp hour rating. This is the number of amps the battery can deliver for X hours. Roughly, a 100 amp hour battery (in fully charged, brand new condition) can deliver 20 amps for 5 hours or 10 amps for 10 hours or 5 amps for 20 hours. So there's your starting point. Then figure how many amps all the various appliances will draw from the battery. Then divide amps drawn into the amp-hour of the batteries for the number of hours you can operate them. Do the reverse for the battery charger. How many amps can the charger deliver? Divide the charger amps into the battery amp-hours for the time it will take to charge the battery. Again ... The "Depends:" Large charge amps will charge faster but the battery life suffers. Large amp draws will shorten battery life and reduce total amps available. A lot of details have been glossed over but this is the general idea of battery power. |