Saddle rack help
chasingkans
Reg. Jan 2010
Posted 2010-01-01 2:33 PM (#114732)
Subject: Saddle rack help


Member


Posts: 8

Location: Rimrock, AZ

Hi all, I am new here and have a question. I have a 3 horse slant with a dressing room. My 3 tiered saddle rack is in need of repair. it has V wood slats covered with padding and vinal. well they are not staying straight, they are wobbling so my saddles end up on the floor. does any one know how I can fix them?

Thanks

 

share Top of the page Bottom of the page
gard
Reg. Aug 2007
Posted 2010-01-01 10:41 PM (#114752 - in reply to #114732)
Subject: RE: Saddle rack help


Expert


Posts: 5870
50005001001001002525
Location: western PA

You could replace them with something like this:

http://cgi.ebay.com/Saddle-Rack-by-Saddle-Boss-The-Ultimate-Saddle-Rack_W0QQitemZ320448676710QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item4a9c3ac366

share Top of the page Bottom of the page
tucson
Reg. Dec 2009
Posted 2010-01-05 10:00 AM (#114900 - in reply to #114732)
Subject: RE: Saddle rack help


Member


Posts: 16

Location: WayOutWest

are the wood slats tilting or the saddles slipping off of the vynal? If the second is the case, you could tack som carpet pcs. onto the vynal with some contact cement so it wouldn't be so slippery.

share Top of the page Bottom of the page
chasingkans
Reg. Jan 2010
Posted 2010-01-05 10:02 AM (#114901 - in reply to #114732)
Subject: RE: Saddle rack help


Member


Posts: 8

Location: Rimrock, AZ
The wood slats are tilting. I think they need to be braced better.
share Top of the page Bottom of the page
tucson
Reg. Dec 2009
Posted 2010-01-05 10:05 AM (#114902 - in reply to #114732)
Subject: RE: Saddle rack help


Member


Posts: 16

Location: WayOutWest
what are the wood slats attached too?
share Top of the page Bottom of the page