problems with drop leg jack
ccook
Reg. Jan 2004
Posted 2009-11-14 6:14 AM (#113155)
Subject: problems with drop leg jack


Member


Posts: 10

I have the 12k spring loaded jack on my gooseneck that i am having problems with, I started to get hard to crank.  NOw i can't crank it all.  I greased the gears this year.  The gears look ok.  Looking for a resolution to fix it before I have to buy a new one.  I bought the trailer used and its a 93' soft touch gooseneck.

Thank you :)

 

share Top of the page Bottom of the page
hosspuller
Reg. Oct 2003
Posted 2009-11-14 9:48 AM (#113161 - in reply to #113155)
Subject: RE: problems with drop leg jack


Expert


Posts: 2959
20005001001001001002525
Location: North Carolina		The gears are only one part.  There is a screw (that the gears turn) and nut inside the leg.  You'll have to extend the jack till you see a hole through the leg to the screw.  Look at the side of the stationary part of the leg.  There is a hole that is blocked by the moving part of the leg.  Extend the leg till the holes align.  Then oil the screw. 
share Top of the page Bottom of the page
ccook
Reg. Jan 2004
Posted 2009-11-16 3:04 AM (#113215 - in reply to #113161)
Subject: RE: problems with drop leg jack


Member


Posts: 10

I will try this first, thank you for your help!
share Top of the page Bottom of the page