Converting an aluminum livestock trailer to slant load horse
Jellosalad
Reg. Apr 2009
Posted 2009-04-30 11:46 AM (#104218)
Subject: Converting an aluminum livestock trailer to slant load horse


New User


Posts: 2

Location: Conifer, Colorado
I just bought a Circle J lightning Stock trailer, which has lovely plywood and rubber mat padding on the front (dressing room) and back(swinging door) but just the aluminum cladding and the posts to support it on the sides. I'm planning to use it as a slant-load horse trailer. I'm assuming I"ll add plywood and then bedliner coating or purchased mat material on top of that, to the sides so my horse doesn't dent the cladding?

What thickness plywood should I use? Is paint-on bedliner enough rubbery stuff for this purpose? If not, where can I buy the mat material, and what might I expect to pay? I'm very new at this, obviously. When I ordered the trailer, (From a private party) they led me to believe this had already been done... sigh. Thanks in advance.
share Top of the page Bottom of the page
dawnb
Reg. Aug 2007
Posted 2009-05-02 9:57 AM (#104332 - in reply to #104218)
Subject: RE: Converting an aluminum livestock trailer to slant load horse


Veteran


Posts: 214
100100
Location: lyle,mn
Floor mats you can get TSC or FF. I also bumping this up for you maybe Gard will answer this, he is very knowledgeable. You can try to PM him.
share Top of the page Bottom of the page
Jellosalad
Reg. Apr 2009
Posted 2009-05-02 12:46 PM (#104341 - in reply to #104218)
Subject: RE: Converting an aluminum livestock trailer to slant load horse


New User


Posts: 2

Location: Conifer, Colorado
Sorry to be ignorant, but what (or who) is TSC or FF? Thanks!
share Top of the page Bottom of the page
tr0y
Reg. Mar 2009
Posted 2009-05-02 2:52 PM (#104347 - in reply to #104218)
Subject: RE: Converting an aluminum livestock trailer to slant load horse


Veteran


Posts: 114
100
Location: Home of the WNFR at Christmas
They are farm / variety stores that are in the upper midwest, and the south where I have been in them I would bet you can find them in the east as well.

FF = Fleet Farm or Mills Fleet Farm, depending on where you are.

TSC = Tractor Supply Company ( I think ? )

Edited by tr0y 2009-05-02 2:54 PM
share Top of the page Bottom of the page
gard
Reg. Aug 2007
Posted 2009-05-02 3:44 PM (#104350 - in reply to #104218)
Subject: RE: Converting an aluminum livestock trailer to slant load horse


Expert


Posts: 5870
50005001001001002525
Location: western PA

Originally written by Jellosalad on 2009-04-30 11:46 AM

 I'm assuming I"ll add plywood and then bedliner coating or purchased mat material on top of that, to the sides so my horse doesn't dent the cladding? What thickness plywood should I use? Is paint-on bedliner enough rubbery stuff for this purpose? If not, where can I buy the mat material, and what might I expect to pay? QUOTE]

We had a steel stock/combo slant load trailer. It had a single skin siding that was easily dented from the inside by the horses kicking.

I installed 3/4" pressure treated plywood on the butt side and slant wall. The head side wall was undamaged, as our critters don't paw much. Depending on your horses' actions, will depend if wood should be added here as well. My additional plans included, adding cut down stall mats over the wood. I never got to it, and actually never needed the additional padding.

Bed liners painted on the wood, would be of little value and an unnecessary expense. Try the wood alone first, depending on your horses, it may be all you need. If they are constatly kicking and starting to damage the plywood, add some stall mats to the surface. They are available at many locations, and will last many years.

Gard

share Top of the page Bottom of the page
Bit O Gold Paints
Reg. May 2009
Posted 2009-05-17 11:00 PM (#105058 - in reply to #104218)
Subject: RE: Converting an aluminum livestock trailer to slant load horse



New User


Posts: 1

Location: Michigan
I have a steel stock trailer that I am trying to find and purchase the slant dividers to convert it to a slant load.......but have had no luck in finding dividers. Anyone know where I can purchase dividers? I have a 7x16 Valley Stock Trailer. Thanks
share Top of the page Bottom of the page
gard
Reg. Aug 2007
Posted 2009-05-17 11:10 PM (#105059 - in reply to #104218)
Subject: RE: Converting an aluminum livestock trailer to slant load horse


Expert


Posts: 5870
50005001001001002525
Location: western PA

Some while ago, there was a posting of various trailer salvage and junk yards throughout the states. You can try a search or wait for a Retento, who is an expert in finding all information.

Gard

share Top of the page Bottom of the page
retento
Reg. Aug 2004
Posted 2009-05-18 4:05 AM (#105060 - in reply to #104218)
Subject: RE: Converting an aluminum livestock trailer to slant load horse


Expert


Posts: 3802
20001000500100100100
Location: Rocky Mount N.C.

 Quote... Anyone know where I can purchase dividers? 

These are the only threads I have found with any discussion about slant dividers and slavage horse trailers/parts in the past year... There are other threads that pertain to LQ's.... That had links to RV salvage companies.

http://www.horsetrailerworld.com/forum/thread-view.asp?threadid=9818

http://www.horsetrailerworld.com/forum/thread-view.asp?threadid=9692

http://www.horsetrailerworld.com/forum/thread-view.asp?threadid=10361

 

I know, there's ZERO info in those threads, but that was the best I could come up with. There has been discussion some years back about adding slant dividers, but it is long gone.

Contact Valley Trailers, have them build you a/some dividers and install them. Have some dividers built and installed by a local fabricator. Trade and or sell your trailer and buy a slant load, or leave it be and continue as you have in the past. Sorry, I'm no help to you.....

 



Edited by retento 2009-05-18 5:35 AM
share Top of the page Bottom of the page
gard
Reg. Aug 2007
Posted 2009-05-18 8:31 AM (#105068 - in reply to #104218)
Subject: RE: Converting an aluminum livestock trailer to slant load horse


Expert


Posts: 5870
50005001001001002525
Location: western PA

I don't know if any of the businesses in this list would have what you're looking for. One of them might be able to point you in the right direction.

http://rvbasics.com/techtips/oldparts.html

gard

share Top of the page Bottom of the page