Posted 2023-06-09 8:19 PM (#185579) Subject: Trailer VIN fell off, I don't know what trailer this is..
New User
Posts: 1
I ended up with this trailer with no registration and no VIN/ID number. Some people say that the number should be stamped on the trailer in another spot. The undercarriage of this trailer is rock guarded though. So if it is stamped, I wont be able to see it because of the thick rock guard paint. But at least if I knew where the stamp might be, I could remove the paint in that location.
This trailer is in Langley BC Canada. There are so many brands out there, its probably impossible. But if anyone happens to have the same brand, they might recognize it. It is very generic.
A few distinct features
-It has a wood panel back door.
-Dexter axles with electric brakes
-The fenders are welded on just on the lower part of each end of the fender. I have never seen them done like that before
(I have pictures that I hope to add after I submit the thread)
Posted 2023-06-12 1:34 PM (#185580 - in reply to #185579) Subject: RE: Trailer VIN fell off, I don't know what trailer this is..
Regular
Posts: 76 Location: Michigan
Looks a lot like a late 80's WW that some friends had years and years ago but I would think that the fenders and back door were replaced at some point. Probably due rust as friends doors and fenders rusted at an an accelerated rate compared to the body & frame.
Posted 2023-07-31 11:39 PM (#185614 - in reply to #185579) Subject: RE: Trailer VIN fell off, I don't know what trailer this is..
New User
Posts: 1
If this is an old W-W Trailer it has had some modifications done to it over the years (which isn’t uncommon). If it is indeed a W-W it will have a hidden VIN/Serial number stamped in at least two separate locations. The number will be 6 digits long. You can make a request for those hidden locations by calling W-W Trailer but you will need to be able to provide proof of ownership.
Trailer VIN fell off, I don't know what trailer this is..
