Well, I went and done it now. Turned to hard -pulled the wires out of the plug.. I know.. I know...Not too bright.. but damage is done.

I've got the running lights and turn lights figured out but can't figure out the remaining 3 wires

I've got red/black, blue/ black and black

Where do these go?

Thanks

Red is your brake (S) and Black is your ground (GD)...larger hole on side, Blue is your 12v hot auxilary (A) in the center. Hope this helps!  (6 hole pattern)

hi. thanks it's got a 7-way rec plug on it.

Thanks for your help

After you get the plug fixed I suggest putting a plug in the bed of your pickup to prevent this from happening again (if it is a gooseneck). It can mount either in front or behind the left wheelwell inside the bed. Not only does it prevent what happened to you but also looks cleaner.

Mark M