Posted 2007-01-23 11:53 AM (#54338 - in reply to #54317) Subject: RE: brake box ?
Elite Veteran
Posts: 644 Location: Odenville, Alabama
If your tow vehicle is already pre-wired for a trailer plug in, you can install the brake box yourself. The harness should already be under the dash. Just mount and plug in. Or take it to any mechanic, or trailer place.
Posted 2007-01-24 8:31 AM (#54402 - in reply to #54317) Subject: RE: brake box ?
Extreme Veteran
Posts: 402 Location: Lockport, Illinois
I would take it to a trailer place, as they install the majority of brake controllers.
I would also get the Tekonsha Prodigy. I don't know what make truck you have, but I have a 2002 Ford 350 and installed my Prodigy in the little compartment below and to the right of the dash. I drilled a 1" hole in the back to pull the connector, and it looks built in.
Posted 2007-01-24 5:06 PM (#54431 - in reply to #54317) Subject: RE: brake box ?
Veteran
Posts: 254 Location: Dickinson, TX
Trailer places wouldn't touch my BrakeSmart. I had to take it to the dealer because it ties into the brake's hydraulic lines to sense pedal pressure. No big deal. Best brake controller I've ever had.
brake box ?
