Posted 2014-09-04 12:50 PM (#160638) Subject: CM trailer review
New User
Posts: 3
Location: Marshall, IL
Im new to this forum... looking to replace my trailer that was totaled in an accident. Found a CM with weekender and cowboy shower, but dont know anything about CM trailers, anyone have good or bad to say??
Posted 2014-09-09 3:20 AM (#160697 - in reply to #160638) Subject: RE: CM trailer review
Extreme Veteran
Posts: 304
I have 04 Norstar model. 3 Horse Slant. Other than the roof, I love it. very solid made, great door and window hinges and latches. Good welding, overall quality is high.
Posted 2014-09-10 1:41 PM (#160716 - in reply to #160638) Subject: RE: CM trailer review
Member
Posts: 15
Location: SW OK
I know you're interested in horse trailers, but if it means anything to you we have a CM aluminum stock trailer. It's a 2012 model 6'8" x 20' Roundup model. We've been very happy with it so far. Other than a broken weld (partly my fault)on the center gate latch (steel) which was repaired quickly, cleanly and for free, I'm very impressed with the quality and workmanship. It pulls really well, too. We put a lot of miles on it, and use it hard, and it's holding up very well so far. There are more expensive trailers out there, but I feel like the CM is a really good value
Posted 2014-09-10 1:47 PM (#160717 - in reply to #160638) Subject: RE: CM trailer review
Member
Posts: 15
Location: SW OK
CM aluminum's and Cimarron's were produced in the same factory for awhile (less than a half hour from here) but later model CM's are produced somewhere in TX, I believe. Some of the older trailers were almost identical, and they still share some similar designs.
CM trailer review
