Posted 2014-06-18 5:17 PM (#159534 - in reply to #159532) Subject: RE: What to use.
Veteran
Posts: 175 Location: Florida
I'd suggest Grade 8 (stainless) bolts. A couple of years ago I lost a cam lever when the original bolt broke. Have since replaced with Grade 8 bolts. If you don't have a source in mind, Menards and TSC do have a selection.
Posted 2014-06-18 7:24 PM (#159535 - in reply to #159532) Subject: RE: What to use.
Regular
Posts: 97 Location: mancelona michigan
Stainless is definitly the way to go,but there are no gr 8 stailess fasteners.Stainless fasteners fall some where between gr 4 and 3,they actually do not sarry a "grade " mark.
What to use.
