KEYLESS ENTRY

fergus
Reg. Mar 2016

Posted 2016-06-16 5:57 PM (#167341)
Subject: KEYLESS ENTRY

Member

Posts: 13

Location: Decatur, Texas

Does anybody have or has anybody used these keyless entry system that replaces the original paddle handle on the LQ doors? Seen some around $125 or so that is a simple replacement of the original equipment unit.Just trying to figure out if they are worth the money or not. Wife wanting the keyless but I am not wanting to cut holes for a larger deadbolt type keyless system.Thanks

0 likes

kooner
Reg. Jun 2011

Posted 2016-06-16 7:02 PM (#167342 - in reply to #167341)
Subject: RE: KEYLESS ENTRY

Extreme Veteran

Posts: 350
100

Location: Penrose, Colorado

when I put mine on it was a bolt on thing, no extra cutting. I have one on the entry door and tack and I think it is great.

0 likes

Spin Doctor
Reg. Nov 2008

Posted 2016-06-17 3:08 PM (#167347 - in reply to #167341)
Subject: RE: KEYLESS ENTRY

Extreme Veteran

Posts: 402
100

Location: Valentine, NE

On our Hart, it bolts on the door with just 2 small bolts thru the door. Works great and would not be without. The door framing must allow clearance for the dead bolt to work--need about 1.5" or so of door frame exposed on the inside for the deadbolt to work. Plan on getting one for the rear tack door and our stock combo trailer.

0 likes

fergus
Reg. Mar 2016

Posted 2016-06-17 5:12 PM (#167349 - in reply to #167341)
Subject: RE: KEYLESS ENTRY

Member

Posts: 13

Location: Decatur, Texas

Thanks for the replies.... I think I am going to try one of them as cheap as they are. Looked pretty simple but wasn't sure.

0 likes

kooner
Reg. Jun 2011

Posted 2016-06-18 7:47 AM (#167354 - in reply to #167341)
Subject: RE: KEYLESS ENTRY

Extreme Veteran

Posts: 350
100

Location: Penrose, Colorado

Fergus the door lock I put on is for an RV I do not know if a house type can be put on or not. happy shopping

0 likes