110 interior lights
reiner11
Reg. Sep 2011
Posted 2012-03-24 6:00 PM (#142450)
Subject: 110 interior lights


Regular


Posts: 55
2525
Does anyone know of a 110v flush mount ceiling light that is designed like the 12 volt to mount without having to try and fit a gang box in the ceiling or some kind of light that all you do is feed the wire through the ceiling. My trailer is a 110 only and am having a time finding 110v stuff to fit in the limited space between the walls and what will be the finished panel. Thank you
share Top of the page Bottom of the page
gard
Reg. Aug 2007
Posted 2012-03-24 9:29 PM (#142457 - in reply to #142450)
Subject: RE: 110 interior lights


Expert


Posts: 5870
50005001001001002525
Location: western PA

Other than a surface mount fluorescent fixture, I can't think of any. Heat is an issue with the larger voltages.

They do make gang boxes that are half as deep as standard boxes, that can be used for LQ interiors. They are commonly available at hardware and big box stores.

http://www.homedepot.com/buy/electrical-electrical-boxes-conduit-fittings-boxes-brackets/carlon-1-gang-17-cu-in-shallow-old-work-box-184225.html

Here's one that's only an inch deep:

http://www.goodmart.com/products/raco-404-1-in-deep-shallow-switch-box.htm

share Top of the page Bottom of the page
reiner11
Reg. Sep 2011
Posted 2012-03-25 7:11 AM (#142463 - in reply to #142450)
Subject: RE: 110 interior lights


Regular


Posts: 55
2525
Thank you Gard. Your help is much appreciated.
share Top of the page Bottom of the page
ellisor
Reg. Oct 2010
Posted 2012-03-25 8:52 AM (#142464 - in reply to #142450)
Subject: RE: 110 interior lights


Member


Posts: 26
25
Location: East Texas		Take a look at the Led "puck" and "strip" lights. Some are made to recess, some are only an inch or so thick. Good light source also.
I used a three Led strip over the sink and have two sets of three light pucks in the neck.
share Top of the page Bottom of the page